Starter Kit Contains:

2 each #5005 No Nails Corner Bumpers, 48' of #5009 No Nails Side Bumper Strips, 600 Stainless Steel Nails.

Our newest and neatest! Now any wooden-sided dock - old or brand new installations, can be beautified quickly and easily with the new Jim Buoy No Nails* Dock Bumper System. All it takes is one man, a helper and a hammer. The corner bumper, designed with a recessed step, is first nailed into place, then followed by nailing the side bumper strip to form a snugly fitting lap joint (see sketch). In a few minutes the installation becomes a routine. The finished job will enhance any dock area and best of all the installation nails are all hidden from normal view!

Manufactured from the finest UV Inhibited, all white Marine Vinyl, it will provide years of trouble free service. For ease in handling, we recommend to avoid freezing cold weather during installation as the vinyl is much more flexible on a warm day.

Superior protection at no added cost - Both models are designed with an extra volume of cushion at the point of contact and are molded from white, weather resistant marine vinyl...the best material available for use at this critical point of impact. The new, heavy-duty #5008 is designed to take the beating of all larger and heavier vessels. Similar in construction as the popular #5007 and designed to match the configuration of the new #5013 dock bumper.

Corner Bumper Model #5007 - 8'' x 8'' x 4'' ht.

Corner Bumper Model #5008 - 10'' x 10'' x 6'' ht.

#5012, Industrial Duty, UV Inhibited - Extra heavy-duty white vinyl and much larger in size for heavy commercial traffic or larger vessels.  Model #5012 - 7 1/2'' white vinyl, 10 feet long.

#5011, Piling Bumper - Usually mounted vertically to protect against those monstrous pilings that are always in the wrong place.  Model #5011 - 2'' white vinyl, 6 feet long.

#5013, Extra Heavy Duty, UV Inhibited - Protects the more expensive larger and heavier boats. Matches new, larger #5008 corner bumper in size and configuration.  Model #5013 - Heavy white vinyl 5 1/2'' width, 2 1/2'' depth, 6ft. long.

Three great dock bumper sizes - All Models available with corner or straight mount bases!
Model #5016 - In answer to many requests for greatest possible standoff!
Sealed inflation - For years of trouble-free use!

All Models provide a substantial cushion in the most troublesome tides, currents or fresh breezes. Finest heavy-duty vinyl wall construction with hot-dipped galvanized or epoxy coated steel hardware throughout and large sizes feature a 2'' diameter axle housing to assure maximum strength under severe conditions.

(Designate corner or straight mount when ordering, i.e. 5006-S or 5006-C).

• Model #500 - 12'' diameter X 6'' high
• Model #5006-6'' diameter X 3'' high
• Model #5016-16'' diameter X6'' high